ASTARIGLAS® LED BLOCK is an exceptional alternative to conventional fabrication materials and methods. Ideas that were difficult to realize can now be created quickly without compromising quality, light diffusion, and illumination. The finished products will be stylish, sleek, and of the highest quality.
ASTARIGLAS® LED BLOCK is available in 3 thicknesses and two sizes; lighting and signage can now be made from a single block without having to put together multiple blocks for length and effect. This also opens up new usage and design ideas for light fixtures and signage as well as furniture, displays and accessories.
A flatbed CNC router allows you to create the perfect product with speed and efficiency. Carve out your designs cleanly and precisely, saving on manpower, time and energy. The CNC router makes it easy to create the channels needed to embed the LED light, either inside the block itself or on a rear plate.
With its high translucency and light transmission, ASTARIGLAS® LED BLOCK also requires less LED light to produce the same brightness. Three white hues are available according to your needs and usage, allowing for maximum illumination through homogeneous diffusion.
ASTARIGLAS® is your perfect choice to use in various segments.
From advertising to transportation, hospital, food and beverages, and many other industries.
Find out more about our certification and compliance.
All ASTARIGLAS® Cast Acrylic Sheets are manufactured to meet the standard specification of ISO 9001:2015.
ASTARIGLAS® sheet have been certified by Underwriters Laboratories to UL 94HB, the Standard for Safety of Flammability of Plastic Materials (for slow burning on a horizontal specimen).
ASTARIGLAS® have been certified by UL 752 level 1, this product provides protection against three shots of a 124-grain 9mm full metal copper jacket with lead core at an fps between1175 and 1293.
All ASTARIGLAS® products are BPA free.
All ASTARIGLAS® Acrylic Sheets are manufactured to meet the standard specification of ASTM D 4802-10.
ASTARIGLAS® Clear sheet meets the standard of ANSI Z26.1, a standard used by Department of Transportation (DOT).
ASTARIGLAS® sheet complies to EPA regulatory on PBT chemicals.
ASTARIGLAS® SW is manufactured to meet the standard specification of EN 263 Compliance.
All ASTARIGLAS® Clear sheet do not contain any chemical known to the State of California to cause cancer, birth defects, or any other reproductive defects.
All ASTARIGLAS® Clear and Opal Sheet products are in compliance with the applicable provisions of RoHS 3 Directive 2015/863/EU.
Please be advised that all ASTARIGLAS® clear products are in compliance with the FDA Food Additive Regulation 21 CFR177.1010 (acrylic and modified acrylic plastics, semi-rigid and rigid) for use in contact for all types of food except for high alcohol content foods (greater than 8% alcohol) at or below room temperature.
All ASTARIGLAS® clear sheet meets the American National Standard For Safety Glazing Motor Vehicles And Motor Vehicle Equipment Operating On Land Highways (ANSI Z26.1-1996).
All ASTARIGLAS® Clear sheet conforms to REACH regulation and do not contain any substances included in SHVC’s 244 lists in a concentration in excess the specified threshold limits.
All ASTARIGLAS® sheet complies to New York State Education Department (NYESD) flammability standards for plastic glazing used to construct sneeze guards or separators.
All ASTARIGLAS® Clear products are biocompatible and in compliance to ISO 10993-5 (Cytotoxicity).
These are products that can apply together with ASTARIGLAS® LED BLOCK.